有机-无机压电材料TMCM-MnCl3的研究

有机-无机压电材料是一种分子铁电体，具有柔性、结构灵活、易成膜、全液相合成及环保节能等优点，可满足新一代薄膜器件及可穿戴设备的需求。该文以三甲基卤代甲基铵(TMXM, X=F, Cl, Br)为有机部分，MnCl₂为无机部分，通过溶液蒸发法制备了具有钙钛矿分子结构的有机-无机压电材料三甲基氯三氯化锰(TMCM-MnCl₃)，并对其分子结构组成、压电、热学、声学及铁电性进行表征。结果表明，TMCM-MnCl₃的压电常数为106 pC/N，居里温度为130 ℃，声阻抗值约为16.5 MRayl，低于压电陶瓷PZT-4(大于33 MRayl)，具有广阔的应用前景。     

大木作术语的物外之意——以四川穿斗民居为例

对四川穿斗民居的田野调查发现,工匠使用的术语存在一物多名、多物同名、异物类名等现象.在梳理田野调查、已有文献大木作术语的基础上,通过设计和施工阶段术语的不同作用,分析具体营造中工匠的思维与意识.同时从术语的角度,就穿斗结构以及术语的重名、异名现象提出新的认识.     

Theoretical investigation of intrinsic point defects and the oxygen migration behavior in rare earth hafnates

In this work, the composition-dependent point defect types and formation energies of RE₂Hf₂O₇ (RE = La, Ce, Pr, Nd, Pm, Sm, Eu and Gd) as well as the oxygen diffusion behavior are systematically investigated by first-principles calculations. The possible defect reactions and dominant defect complexes under stoichiometric and non-stoichiometric conditions are revealed. It is found that O Frenkel pairs are the predominant defect in stoichiometric pyrochlore hafnates. Hf-RE cation anti-site defects, accompanied by RE vacancies and/or oxygen interstitials, are stable in the non-stoichiometric case of HfO₂ excess. On the other hand, RE-Hf anti-site defects together with oxygen vacancies and/or RE interstitials are preferable in the case of RE₂O₃ excess. The energy barriers for the migration along the V_O48f - V_O48f pathway of pyrochlore hafnates were calculated to be between 0.81 eV and 0.89 eV. Based on these results, a defect engineering strategy is proposed and the pyrochlore hafnates investigated here are predicted to exhibit potential oxygen ionic conductivity.     

调控Al2O3晶型控制MgAl2O4:Mn4+荧光粉中Mn价态研究

Mn⁴⁺激活红光荧光粉是白光半导体发光二极管(wLEDs)领域当前研究热点之一。Mn⁴⁺离子²E→⁴A₂跃迁在铝酸盐中的最短发光波长是在MgAl₂O₄中实现的651 nm发光, 由于其结构中含有形成四面体或八面体配位的两种阳离子格位(Mg²⁺/Al³⁺), 易造成所掺杂锰元素存在多种价态(+2/+4/+3等)。本研究通过改变起始原料中Al₂O₃的晶型(γ/α比例)及退火处理来调控锰离子在MgAl₂O₄晶格中的占据格位, 对其主要存在价态实现调控。采用荧光光谱和紫外-可见-近红外漫反射光谱技术来表征所合成荧光粉中Mn离子的价态及其演变。研究发现, 高α/(α+γ)比铝源促进Mn²⁺形成, 而低α/(α+γ)比铝源促进Mn⁴⁺形成。通过使用高活性纳米γ-Al₂O₃为铝源, 有效抑制了锰离子在MgAl₂O₄中Mg²⁺格位的占据及Mn²⁺离子的形成, 经空气中1550 ℃保温5 h的一次高温热处理即可制备出在可见光区只有Mn⁴⁺红光发光的高纯高亮度MgAl₂O₄:Mn⁴⁺荧光粉。氧化铝晶型影响锰离子掺杂格位和掺杂价态的本质规律是: 氧化铝活性决定实际固溶掺杂反应步骤, 进而影响锰离子掺杂格位和价态。本研究提出的反应步骤调控作为反应气氛、电荷补偿剂、反应温度三种调控方法外的一种新方法, 为Mn⁴⁺激活铝酸盐荧光粉中锰离子掺杂价态调控提供了新思路。     

Crushing behavior of alumina inclusions with different porosity during hot compression

Alumina inclusions in commercial as-cast 2.25Cr1Mo0.25V aluminum deoxidized steel exhibited a feature of porous structure. In order to investigate the crushing characteristics of alumina inclusion during hot working, a series of alumina blocks with different porosity whose properties are similar to the alumina inclusions in ingots were prepared using spark plasma sintering. The crushing behavior of alumina blocks during hot compression with quasi-static load was studied. A prediction model of compressive strength of alumina inclusions considering apparent porosity was established on basis of hyperbolic sine Arrhenius equation. A novel crushing mode diagram for alumina inclusions characterized by Z parameter was proposed. The crushing mechanism of alumina inclusions under different deformation parameters was clarified by fracture characteristics. The results showed that the hot compression process of alumina presented a typical brittle fracture, the compressive strength was more sensitive to deformation conditions at lower apparent porosity as compared with the conditions of higher apparent porosity. With the increase of Z, the crushing mode of alumina inclusions gradually changed from intergranular fracture to transgranular fracture.     

超高效液相色谱-飞行时间质谱法快速分析测定山药中7种常见杀菌剂

目的 建立超高效液相色谱-飞行时间质谱检测山药中7种常见杀菌剂的分析方法。方法 样品经乙腈提取，水浴氮吹至近干，丙酮定容，经超高效液相色谱-飞行时间质谱检测。结果 在正离子模式下，7种杀菌剂在水-甲醇（均含有0.01%甲酸和5 mmol/L甲酸铵）流动相中都具有较好的响应；0.01~0.40 mg/L范围内线性良好，相关系数R均大于0.999。不同温度（50℃、70℃）水浴实验结果表明70℃水浴温度符合实验要求。三个浓度水平的加标回收实验的回收率为70.75％～108.07％，相对标准偏差为 0.02％～5.01％。结论 该方法操作简单、分析准确，满足山药中常见杀菌剂的检测要求。     

一种可控的自动扶梯电磁铁驱动电路板

扶梯制动系统是扶梯在出现紧急状况下确保乘客安全的重要设施。制动系统中的安全制动是在工作制动器无法在规定的时间内制停扶梯的一个措施,往往是在一些特别危险的场合下被触发,因此对于此制动器的控制显得尤为重要。本文提出了一种新型的自动扶梯制动器电磁铁驱动电路的设计,该设计用纯电子线路替代了传统的电气与电子组合形式,直接由自动扶梯单片机控制单元进行控制。     

闹市区特殊工况下毫秒微差法爆破施工技术

为解决闹市区爆破作业的难题,依托长沙国金中心项目展开研究.在通过优化爆破参数设计、次生危害控制、特殊工况下安全分析、毫秒微差法爆破施工,成功解决了闹市区特殊工况条件下安全爆破施工的难题,既实现混凝土的粉碎程度满足施工要求,又确保临近支护结构安全、周边建筑物不受爆破影响.     

Flame characteristics of premixed H2-air mixtures explosion venting in a spherical container through a duct

The explosion venting duct can effectively reduce the hazard degree of a gas explosion and conduct the venting energy to the safe area. To investigate the flame quantitative propagation law of explosion venting with a duct, the effects of hydrogen fraction and explosion venting duct length on jet flame propagation characteristics of premixed H₂-air mixtures were analyzed through experiment and simulation. The experiment results under initial conditions of room temperature and 1 atm show that when hydrogen fraction was high enough, part of the unburned hydrogen was mixed with air again to reach an ignitable concentration, resulting in the secondary combustion was easier produced and the duration of the secondary flame increased. With the increase of venting duct length, the flame front distance and propagation velocity increased. Meanwhile, the spatial distribution of pressure field and temperature field, and the propagation process and mechanism of the flame venting with a duct were analyzed using FLUENT software. The variation of the pressure wave and the pressure reflection oscillation law in the explosion venting duct was captured. Therefore, in the industrial explosion venting design with a duct, the hazard caused by the coupling of venting pressure and venting flame under different fractions should be considered comprehensively.